BC RACING COILOVER SUSPENSION Kit fits HONDA CIVIC EM/ES (01-02)A-06-HM

The BC HM Series Coilover Suspension Kit features 30 levels of separate rebound and compression damping force adjustment, full-length height adjustment allowing extremely low ride height, and external reservoirs. The BC HM Series Coilover has been especially designed and developed to meet the demands of the serious driver for professional competition use. Its external reservoirs allow more oil to be contained than a conventional coilover, to slow down oil temperature increase.

The HM is a higher end of the product than ER coilovers. It is available for vehicles with McPherson struts only, and its inverted shock cartridge for McPherson strut utilizes a braided hose to connect remote canister through top mounts. The long braided hose gives installer more freedom when locating caniters in the engine compartment (installers take full responsibility on where to locate the remote canister).

The separate compression adjustment provides a wider range of tuning settings than a traditional coilover, in which only slight changes occur to compression when adjusting the rebound.

The BC HM Series Coilover offers complete adjustment for the individual that demands serious performance and wants to fine tune their suspension setup to their needs

BC HM Series Coilover Standard Features:

Designed for 100% Track Use Only

- Front Top Mounted External Reservoir Braided hose design on inverted shocks

- Camber plates or pillowball top mounts all around (A few car models do not use top mounts)

- Rear External Reservoir

- Twin Piston Design

- Separate Compression & Rebound Adjustment

- 30 Level Damping Force Adjustment

- Full-Length Height Adjustment

- Anodized Alloy Casing

- CNC Machined

- T6061 Alloy Locking Ring

- Inverted shocks on McPherson Struts (depending on car models) Rear Monotube Design For Maximum Performance

- Fully Rebuildable

Spring Rates:

F: 10kg

R: 14kg

Vehicle Compatibility:

• Honda Civic EM/ES (01-02)

Manufacture warranty conditions for ER/HM/ZR models apply as below;

1. Noise from ER/HM/ZR shocks are NOT covered by warranty and are designed for 100% track use only.

2. HM/ZR series shock cartridges (inserts) are NOT sold separately. Whenever a shock cartridge requires replacing the customer is required to buy a complete unit. ER series cartridges can be purchased with lower mount & canister without spring and top mount.

3. Whenever there is a noise issue, oil leaking and or any other damage to ER/HM/ZR shocks the shock cartridge & lower mount or complete unit if an inverted shock must be sent back to BC Racing Taiwan factory for their inspection. Otherwise a complete corner can be purchased or replacement cartridge can be purchased at the customer's own expense including all shipping costs.

4. ER/HM/ZR series shocks must be returned to BC Racing factory for their inspected for cause of damage/oil leak before a warranty claim can be approved or denied by the manufacture.

Return Within Warranty Period

A. All shipping costs & repair costs will be covered by BC Racing if damage/oil leaking is deemed to be caused under normal use after unit/s have been inspected by BC Racing Taiwan.

B. Repair costs and shipping costs back & forth will be covered by the customer if damage or oil leaking is caused by incorrect use, installation, adjustment or external force.

Return out of Warranty Period

Repair costs and all shippings cost back & forth will be covered by the customer.

Disclaimer: Please note that operational noises such as knocks and squeaks from track-oriented products such as pillow ball top mounts and track-oriented coilovers such as the DS, RM, ER, HM or ZR models is a normal characteristic and NOT covered by warranty.